Images May Not be Vehicle Specific. For Display Purposes Only.


Brand: AEM Electronics | Category: Gauges


30-0301 X-Series Oil/Fuel Pressure Gauge
Range 0~100psi / 0~7 Bar
30-0301-ACC X-Series Oil/Fuel Pressure Gauge Accessory Kit
30-0302 X-Series Water/Trans/Oil Temp Gauge
Range 100~300F / 40~150C
30-0302-ACC X-Series Water/Trans/Oil Temp Gauge Accessory Kit
30-0303 X-Series Volts Gauge
Range 8~18V
30-0303-ACC X-Series Volts Gauge Accessory Kit
30-0305 X-Series EGT Gauge
Range 0~1800F / 0~1000C
30-0305-ACC X-Series EGT Gauge Accessory Kit
30-0306 X-Series Boost Pressure Display Gauge
Range -30IN/HG~35psi / -1~2.5 Bar
30-0306-ACC X-Series Boost Pressure Display Gauge Accessory Kit
30-0307 X-Series Oil Pressure Gauge
Range 0~150psi / 0~10 Bar
30-0307-ACC X-Series Oil Pressure Gauge Accessory Kit
30-0308 X-Series Boost Pressure Gauge
Range -30~60psi / -1~4 Bar
30-0308-ACC X-Series Boost Pressure Gauge Accessory Kit
30-0309 X-Series Boost / Fuel Pressure Gauge
Range 0~15psi
30-0309-ACC X-Series Boost / Fuel Pressure Gauge Accessory Kit
30-0310N X-Series Inline Wideband UEGO Controller
For use with NASCAR McLaren ECU via CAN
30-0311 X-Series OBDII Gauge
Bezel Black
Faceplate Black
30-0311-ACC X-Series OBDII Gauge Accessory Kit
30-0312 X-Series AEMnet Can Bus Gauge
Bezel Black
Faceplate Black
30-0312-ACC X-Series AEMnet Can Bus Gauge Accessory Kit
30-0313 X-Series GPS Speedometer Gauge
Bezel Black
Faceplate Black
Range 0~160mph / 0~240kph
30-0313-ACC X-Series GPS Speedometer Gauge Accessory Kit
30-3442 VR Output Harness for 30-0313 X-Series GPS Gauge
30-3443 Main Harness for 30-0302 X-Series Temp Gauge
30-3444 Main Harness for 30-0301, 30-0306, 30-0307, 30-0308, 30-0309 X-Series Pressure Gauges
30-3445 Main Harness for 30-0303 X-Series Voltage Gauge
30-3446 Main Harness for 30-0312 X-Series AEMnet Gauge
30-3447 Main Harness for 30-0305 X-Series EGT Gauge
30-3456 Main Harness for 30-0313 X-Series GPS-Speedo Gauge
30-3458 Main Harness for 30-0311 X-Series OBD2 Gauge

Product Description

AEM’s new X-Series Digital Gauges combine incredible looks, increased readability and a multitude of new, easy-to-use features! X-Series Digital Display Gauges are available for Boost, EGT, Fuel/Oil Pressure, Oil/Water/Trans Temperature and Volts. These new gauges complement the X-Series Digital Wideband AFR gauge which was released in the winter and is the fastest responding wideband in independent testing.

Visual improvements include a bright three- or four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see displayed values at a glance. X-Series Gauges come with a black bezel and faceplate, and optional silver bezel/white faceplate accessory kits are available for each gauge (sold separately).

Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.

X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric display, and user-selectable min/max threshold warnings. The faceplates are reversible for standard or metric. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.

X-Series Digital Display Gauge Features:

  • 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods
  • Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!
  • Programmable standard or metric readout with reversible faceplates
  • Center LED is 87% larger than original AEM gauges
  • 24 green outer LEDs for quick reference to engine parameter
  • Peak/Recall via gauge face buttons
  • User selectable min/max threshold warnings (excl. Volts)
  • Optional silver bezel with white faceplate(s) accessory kits available (sold separately)
  • AEMnet CANbus-enabled for transmitting data to EMS or Data Logger
  • 0-5v analog outputs for transmitting data to EMS or Data Logger
  • Auto dimming sensor delivers ideal display brightness
  • Positive locking connectors provide secure connection

Product Reviews

Be the first to review this item.